Auto Talk; Recall; Prefix - Silvercrest SDKT 1.76 A1 Bedienungsanleitung Und Serviceinformationen

Auto Talk

If the handset is on the base when an incoming call arrives, the call can be accepted automatically by
removing the handset from the base. Press the  or  directional control buttons [4] to switch this
function on or off. To save the selected setting, press the right display button [3].

Recall

You can use the Recall button ( ) of the directional control [4] during a call for switching to an internal
conversation or to forward the call when using the device with a PBX. The Recall button ( ) will cause
a short, temporary line interruption. You'll have to adjust the following settings only when you have
connected the telephone to a PBX. See also the User Manual for your PBX.
The following options are available:

Short
Off-hook cycle 100 ms

Long
Off-hook cycle 300 ms
To save the selected setting, press the right display button [3].
The Recall button ( ) allows you to use specific services for external phone calls, e.g. "Call
Waiting". The requirement for this is that your network provider supports this feature.

Prefix

Here you can save a number to be dialled before any external call. For example, you can enter 0 or 9
for an external line if you are using a PBX.
If no phone number has been saved, the only available menu option will be "New". If a
phone number has been saved already, the items "On/Off", "Show/Hide" and "Edit" will
be shown.
New
Here you can save the number to be dialled before any external call. Input the phone number via the
numeric buttons [6]. Press the right display button [3] to save it.
SilverCrest SDKT 1.76 A1
English - 43