Settings; Language; Registration - Silvercrest SDKT 1.76 A1 Bedienungsanleitung Und Serviceinformationen

Settings

Press the right display button [3] followed by the 1 button to open the "Settings" menu.

Language

Press the  or  directional control buttons [4] to select the desired language from the list. Press the
right display button [3] to confirm your selection. A confirmation beep will sound.

Registration

Register a handset (Register)
To register a handset with the base, proceed as follows:

Press the  or  directional control buttons [4] to select the base from the list where you
want to register the handset.

Enter the 4-digit PIN (default 0000).

Press and hold the Pager button [19] on the base as long as necessary (approx. 20 seconds)
to establish the connection. This is indicated by a confirmation beep.
De-register a handset (De-register)
This menu items allows you to de-register a handset that is currently registered with the base. Proceed
as follows:

First enter the 4-digit PIN (default 0000).

Press the right display button [3] to confirm your input.

Enter the number of the handset that you want to de-register (e.g. 1).

Press the right display button [3] to confirm your input.

A confirmation beep will sound.

Instead of the name of the handset, the de-registered handset display will show "Not
Register".
It is not possible to de-register the handset you are using.
Select Base
This allows you to select the base where you want to register a handset. As you will normally have one
base only, you can use the default setting "Auto". Where several bases are available, you can select
the desired base manually from the list.
SilverCrest SDKT 1.76 A1
English - 23