Troubleshooting; Technical Data - GALLIN YH-28 Gebrauchsanleitung

EN

Troubleshooting

If the device does not work properly, check whether you are able to rectify the problem
yourself. If the problem cannot be solved with the steps that are listed, contact the cus-
tomer service department.
Do not attempt to repair a defective electrical device yourself!
Problem
The device does not
work.
The device switches
off on its own.
The fuse in the fuse
box is triggered.
During use, an
unpleasant smell is
detected.

Technical Data

Article:
Model:
Power supply:
Output:
Protection class: II
Remote control
Power supply:
Possible cause
The mains plug is not inserted
correctly in the socket.
The socket is defective.
No mains voltage is present.
The timer has been set.
The anti-tilt mechanism has
been activated.
Too many devices connected
to the same circuit.
No error can be identifi ed.
The device is being used for
the fi rst time.
03438
YH-28
220 – 240 V~ 50 Hz
max. 400 W
3 V (2 x 1.5 V batteries, Type AAA)
20
Fix
Correct the fi t of the mains
plug.
Try another
socket.
Check the fuse of the mains
connection.
The device switches off
automatically after the pre-
set time has elapsed (see
"Use" – "Setting the Timer"
chapter).
The device switches itself off
automatically if its position
becomes unstable during
operation. This prevents the
risk of fi re if the device topples
over.
Reduce the number of devic-
es in the circuit.
Contact our customer service
department.
There are production residues
in / on the device. This is nor-
mal and will not occur again
later. Make sure that the room
is well ventilated!