Werbung
Verfügbare Sprachen
Verfügbare Sprachen
THE BUTTONS:
IN 1..3:
Activates the corresponding input and deactivates all the others.
SUB:
Pressing the SUB button routes the signal to the high pass filter on the outputs 1..3
and the SUB output channel is then occupied with the correspondingly filtered low-pass signal.
This configuration is suitable for connection to a 2.1 sound system, or in order to simulate one.
OUT 1..3: Choice of loudspeaker pairs, 1 – 3.
HEAD:
Mutes all loudspeaker pairs and routes the signal to the headphone amplifier.
The corresponding output jack is situated at the rear of the remote unit.
HE HEADPHONE CHANNEL:
Connecting the headphone to the mixing process only makes sense if this can be switched without com-
plication and at a similar volume to the monitors. A major difference in the volume between headphone
and monitors would result in a displacement of the acoustic pattern and with it lose the possibility of a
comparison. During the development of the Montreux, we kept a close eye on the quality of the sound and
output performance of the headphone amplifier so that they can be included in the production process.
By pressing the HEAD button, all other outputs are muted. The adjustment of the volume at the monitors
is then achieved with the help of the Offset-Gain control. The technical specifications of the headphone
amplifier are of equally high quality and equivalent to the quality of the controller in both S/N and THD.
ADJUSTMENT OF THE OFFSET-GAIN:
Offset-Gain can be applied to the three inputs as well as the 4 outputs
(3x Controller, 1x Headphone).
PLEASE FOLLOW THESE INSTRUCTIONS:
A. Press the chosen channel (input / output) for approx. 2 secs. The channel LED will begin to
blink, and the LED's in the bottom row will light up.
B. The Mono (-) and Side (+) buttons change the Gain in 0.1dB steps within the range of -24dB
to +24dB. Keeping the buttons pressed will change the gain continuously until released.
C. The Dim button will return the gain of the selected channel back to 0dB.
D. The Mute button will exit the Offset menu.
TECHNICAL DATA:
DA 118dB S/N
AD 110dB S/N
DA better -103 dB THD+N
AD better -100 dB THD+N
HIGHPASS/LOWPASS CROSSOVER FREQUENCIES
12dB / Oct at 80Hz with a quality factor of 0.707
MONTREUX
HEADPHONE PERFORMANCE:
8 Ohm => 1.57W
20 Ohm => 1.42W
100 Ohm => 0.5W
200 Ohm => 0.3W
600 Ohm => 100mW
Werbung
