Werbung
Verfügbare Sprachen
Verfügbare Sprachen
INFLATION INSTRUCTION
INFLATING SPORTING EQUIPMENT
(I.E. BASKETBALL) OR PARTY BALLOONS
1. Loosen the union valve from the air nozzle.
2. Insert the ball/balloon adapter into the air
nozzle and tighten the union valve.
3. Turn on the digital tire gauge by pressing
button and the LCD will light up. After
15 seconds of inactivity, the digital tire gauge
will turn off automatically to conserve energy.
4. Insert the ball/balloon adapter into valve of
the object is fully inflated.
5. Operate the air compressor until the object
is fully inflated.
6. Remove ball/balloon adapter from the
inflated object's valve.
NOTE: If a pressure reading is required during
inflation, the built-in pressure gauge will provide
an estimated reading only.
WARNING
The digital tire gauge must turn on before
operating the air compressor. Please read,
and understand the instruction provided in
the manual prior to operation.
The built-in pressure gauge will provide
an estimated reading only. Please use a
digital pressure gauge for more accuracy
pressure information.
www.my-airman.com
STORAGE
We recommend that if the professional
cordless air compressor is not going to be
used for more than a month, the battery
should be removed from the unit.
CAUTION
Do not run the air compressor
continuously for more than 15 minutes.
After each 15 minutes, allow it to cool
for a minimum of 15 minutes.
Do not leave the air compressor
unattended while in operation.
Keep out of reach of children.
Do not exceed maximum pressure
of 120 psi.
4
Werbung
