ZyXEL Communications NSA210 Bedienungsanleitung Seite 15

Troubleshooting
Try the following if you cannot get to the NSA210 login screen.
• Make sure the NSA210 is turned on.
• Check the NSA210's cable connections. Make sure the NSA210's
LAN LED (located on the LAN port) is on or flashing.
• Make sure you have initialized your NSA210 using the NAS Starter
Utility.
• If you were trying to login directly by typing the server name (default
nsa210) into your web browsers address field, make sure you have
installed the NAS Starter Utility and that you have typed the server
name correctly. If it still doesn't work, try running the NAS Starter
Utility steps again.
• Make sure your computer's IP address is in the same subnet as the
NSA210's IP address. You can use the NAS Starter Utility to find
the NSA210's IP address. See the User's Guide appendix on
setting up your computer's IP address for how to change your
computer's IP address. Skip this if you know that there are routers
between your computer and the NSA210 (like if you are connecting
through the Internet).
• Ping the NSA210 from your computer. Make sure your computer's
Ethernet adapter is installed and functioning properly. In a
(Windows) computer, click Start, (All) Programs, Accessories
and then Command Prompt. In the Command Prompt window,
type "ping" followed by the NSA210's IP address and press
[ENTER]. Use the NAS Starter Utility to find the NSA210's IP
address if you don't know it.
• Use Internet Explorer 6.0, Mozilla Firefox 1.07, Netscape Navigator
7.0, or later versions of these with JavaScript enabled.
ENGLISH
15