AQUA A-TECHNOPOOL PH-RX Bedienungsanleitung Seite 5

3.0 Technopool Programming
The Technopool programming is divided into 2 menu: User Menu and Installation Menu
Press F to scroll User menu.
Press Up-Down to change values.
Press Enter to confirm setting values.
Keep Pressed Enter to enter the Installation menu (password will be required)
3.1 User menu
User Menu is suitable for daily adjustment of Technopool settings.
It allows to:
Adjust pH set point (always inside the Proportional limit L1 see below Installation
♦
menu)
Adjust Rx set point (always inside the Proportional limit L1 see below Installation
♦
menu)
Make pumps priming (pressing Up and Down Botton the pumps will work at 100%)
♦
A-TECHNOPOOL PH-RX
*Only for CONNECT version
*Only for CONNECT version
*Only for CONNECT version
28/06/2010 5/64