Main Specification; Unpacking And Checking Contents - Scantool 16A Benutzerhandbuch

Chuck Capacity
Distance, Spindle to column
Max.Spindle travel
Max.distance chuck to table
Max.distance chuck to base
Overall dimensions (LXMXH)
Net Weight
Range of spindle speeds
12 speeds
Motor Speed
-1
50Hz 1400 min
-1
60Hz 1700 min

Unpacking and checking contents

1. Unpacking and checking contents
Separate all the parts from packaging materials and check each item make
sure all items are accounted for before discarding any packing material.
Item
A
B
C
D
E
F
G
2. Remove the protective oil that is applied to the table and column. Use any
ordinary household type grease and spot remover
3. Apply a coat of paste wax to the table and column to prevent rust. Wipe all
parts thoroughly with clean dry cloth.

Main Specification

Bench
16mm
190mm
180 250 300 400 480 580 970 1280 1410 1540 2270 2740
250 340 390 510 600 650 990 1550 1620 1900 2620 3100
Description
Table (square or Round )........................................1
Column Support Asm.............................................1
Owner's Manual.....................................................1
Box of Loose Parts.................................................1
Bag of Loose Parts.................................................*
Base.....................................................................1
Head Asm..............................................................1
80mm
480mm
745mm
1065x650x305mm
61KGS
Spindle Speeds (min
.5.
Floor
16mm
190mm
80mm
745mm
1235mm
1635x610x365mm
67GS
-1
)
Qty