Using With The Blender Attachment; Using With The Beater Attachment; Using With The Chopper Attachment - Fakir LUCCA Benutzeranleitung

GB
• Clean the attachment before using for the first time.

Using with the blender attachment

• Fit the blender attachment in to the main housing and turn it to screw it fully into
position.
• Place the attachment in the food to be beaten and press the start / stop control and
the operating safety button at the same time.
• After the usage, unplug the appliance and turn the attachment anticlockwise to
unscrew it.
CAUTION!
Don't operate food without water!

Using with the beater attachment

• You could use this attachment to mince meat or chop greens, vegetables, cheese,
dried fruits etc.
• Align the opening on the chopper blade with the rod in the centre of the bowl and fit it
in as far as it will go.
• Add the food to be chopped in to the chopper.
• Fit the main housing into the chopper cover by screwing
on it.
• Plug in and press the start-stop control
• Do not use hard foods such as coffee beans.
• When mincing meat ensure all bones or parts have been removed.
• Allow cooked foods to cool down before chopping.
* After finished the usage of the attachment, unplug the appliance.
CAUTION!
Blender and chopper blades are sharp and can be
harmfull. You must be carefull while using.

Using with the chopper attachment

• You could use this attachment to beat and mix.
• Fit stainless steel mixer legs to the mount, pushing them gently until fully in place.
• Fit into the main housing and turn assembly to screw it in as far as it will go.
• Plug in after fitting the attachments to be used. Once connected, press the start-stop
control.
LUCCA
16