Safety Precaution - Soba XT610 Gebrauchsanleitung

XT610 TOWER FAN
OPERATING
I) Using the control buttons
1) Press the "ON/OFF" button on the cover gently. The 'in operation' lamp lights up.
Then press one or more function buttons.
2) Fan function buttons:
a) ON/OFF button: Switches the fan on or off.
b) Blowing intensity selector: Settings I, II and III i.e. low, medium or high.
c) Operating time selector: there are 15 setting options. Operating time increases
by 1⁄2 an hour every time the button is pressed. Maximum operating time
setting is 71⁄2 hours.
d) Rotation mechanism selector. Starts and stops the rotation movement.
e) Blow mode selector switch: normal, rising and falling, "snooze".
3) LED indicator at the front of the fan and its symbols:
I, II and II indicate blowing intensity i.e. low, medium and high.
"0.5h, 1h, 2h, 4h" shows the operating period selected.
(If several lamps light up = take the sum)
Symbol for natural breeze: The strength of Symbol for natural breeze: The strength of
the Tower Fan air current can be set to light, the Tower Fan air current can be set to light,
medium or strong.
Symbol for snooze: With this setting the Symbol for snooze: With this setting the
strength of the air current is reduced after 1 strength of the air current is reduced after 1
hour and continues running at "light" until the hour and continues running at "light" until the
Tower Fan is switched off or the set operating Tower Fan is switched off or the set operating
time has been reached.
II) Using the remote control
The symbols on the remote control correspond to those on the control panel.
III) Widening/Narrowing the rotation angle
There are 5 different rotation settings. Stand behind the fan. Grasp the upper
part of the fan with both hands and turn gently to the left or right. Every time
the fan clicks into place, the rotation angle is increased or decreased by one
setting.
Accessories included
Accessories/Parts
Cross head screws
Cross head screws
Remote control (without battery)

SAFETY PRECAUTION

Always disconnect the appliance before cleaning or servicing to avoid the risk of fire,
shock or injury. To prevent the risk of shock, faulty leads may only be replaced by one
of our service agents or a qualified electrician.
Size Quantity
M5×12 5
M5×32 5
1
3
INSTRUCTIONS
a b c d e