Fan Body And Cone (Only Full Set) - Wohler Fog Spray Gun Bedienungsanleitung

5.2 Fan Body and
Cone
(only full set)
Fig. 18: Cone of the Fan Body
Fig. 19: Battery case of the Fan Body
Use the Cone to create a narrow fog stream that
makes the air stream clearly visible (see fig. 1,
part 2).
NOTE!
Cut the Cone Tube with an utility knife for a larger
opening (0.5 to 1 cm).
•
Open the battery case of the Fan Body with a
screw-driver and install a standard battery
1,5 V LR6.
ATTENTION!
Make sure the polarity is correct. The correct po-
larity is shown in the battery case. To see the po-
larity symbols better, open the battery case and
put the Fan Body on a dark background.
•
Place the Fan Body on the Vapor Chimney of
the Fog Spray Gun.
•
Turn on the Fan with the ON/OFF-key of the
Fan Body (see fig. 1, part 9).
•
Create the fog as described in chapter 5.1 .
Operation
25