CO/Tech JSRF-601F-UK Bedienungsanleitung Seite 3

Variable Heat Gun
Art.no 18-3261
40-8228
Please read the entire instruction manual before use and save it for future reference.
We reserve the right for any errors in text or images and for making any necessary
technical changes to this document. If you should have any questions concerning
technical problems please contact our Customer Services.
Safety
• If the mains lead is damaged it must only be replaced by a qualified tradesman.
• Never expose the heat gun to rain or moisture.
• Never point the heat gun towards people or animals.
• Never block the nozzle by covering it or holding it too close to the object being heated.
• Harmful or toxic gases can be produced when heating paint or varnish. Make sure
your work area is well-ventilated.
Warning – Fire hazard!
The tool can become a fire hazard if used improperly. Please take the following
into consideration:
• Be careful when using the tool in the vicinity of flammable materials.
• Do not hold the heat gun over the same area for a long time.
• Never use the tool in an explosive atmosphere.
• Heat can spread and ignite flammable materials which are not within sight.
• Stand the heat gun up after use and let it cool sufficiently before putting it away
for storage.
• Never leave the heat gun unattended when it is switched on.
• Never use the heat gun for drying clothes or as a hair dryer.
• The high temperatures produced by the heat gun can ignite flammable or
explosive materials.
Model JSRF-601F-UK
JSRF-601F
3