Typical Application - Velleman HAA85WP Bedienungsanleitung

* Duress Output
* Digit Entry Time
* Code Entry Time
* Dimensions
* Weight
Specifications are subject to change for modification without notice.

14. Typical Application

* OUTPUT 1 -----------------
* OUTPUT 2 -----------------
* OUTPUT 3 ----------------- AUXILIARY ALARM CONTROL
* Please consult your alarm control panel manual for the selection of N.C. or N.O. for alarm ON-OFF control.
15. Appendix
1. DRY CONTACT --------
2. N.C. ------------------------
3. N.O. ------------------------
4. TRANSISTOR OPEN COLLECTOR OUTPUT --- An open collector output is equivalent to a Normally Open (N.O.)
The information in this manual is subject to change without prior notice.
HAA85WP
: 150mA sink / 12V DC Open Collector switch to ground
: 10 Seconds, auto refresh
: 30 Seconds, auto refresh
: 129 (H) mm x 84 (W) x 41 (D) mm
: 220g net
DOOR STRIKE
MAIN ALARM CONTROL
A dry contact means no electricity was connected to it. It is prepared for free
connections. Usually the relay contacts provided in a keypad are dry contacts.
Normally Closed, the contact is closed circuit at normal status. It is open circuit when
activated.
Normally Open, the contact is open circuit at normal status. It is closed circuit when
activated.
contact referring to ground similar to a relay contact referring to ground. The
transistor is normally OFF, and its output is switched to ground (-) when activated.
The open collector can only provide switching function for small power but it is
usually good enough for controlling an alarm system.
The Duress Output is Open Collector Output.
8
VELLEMAN