Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
MEANING OF THE SYMBOLS
On the product, the rating label and within these instructions you will find among others the following symbols and
abbreviations. Familiarize yourself with them to reduce hazards like personal injuries and damage to property.
Lock / to tighten or secure
Unlock / to loosen
Note / Remark
Caution / Warning
The product complies with the applicable
European
directives
method of conformity for these directives was
done
INTENDED USE
The machine has been developed for grinding plaster ceilings and walls, both indoor and outdoor, the removal of floor
residues, paint, glue and loose plaster, etc. The machine is not suitable for processing objects which contain asbestos. If
you use this maschine, you must adhere to the mentioned safety precautions. To avoid injuries and damages, you have to
read and understand the manual. This manual should be kept at a safe place so that the information is always available.
The maschine must comply with the requirements in the instructions which include installing, using and maintaining. Any
improper use or all of the activities described in this manual what you shouldn't do, are unlawful misuse outside the statutory
limits of liability of the manufacturer or seller.
The user of the device is liable for all resulting property damage as well as personal injury resulting from misuse. The use of
other or not original components on the machine voids the warranty.
ENVIRONMENT
Do not dispose of electric tools, accessories and packaging together with household waste material (only for EU countries).
In observance of European Directive on waste of electric and electronic equipment and its implementation in accordance
with national law, electric tools that have reached the end of their life must be collected separately and returned to an
environmentally compatible recycling facility.
MAINTENANCE / SERVICE
• Always keep tool and cord clean (especially ventilation slots) do not attempt to clean ventilation slots by inserting pointed
objects through openings disconnect the plug before cleaning
• Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the
safety of the power tool is maintained.
and
an
evaluation
www.schuller.eu
Wear eye protection
Wear hearing protection
Wear a dust mask
Wear protective gloves
Wear protective, slip-resiatant footwear
i
Read the instruction manual
This product is protection class II. That means it
is equipped with enhanced or double insulation.
WEEE symbol. This article shouldn't be disposed
with the household waste. Please recycle where
facilities exist. Check with your local authorities or
local store for recycling advice
GB
7
Werbung
Inhaltsverzeichnis
