Würth master AKP 310-C Power Originalbetriebsanleitung Seite 12

Akkuauspress.book Seite 12 Donnerstag, 5. März 2009 11:23 11
For the current spare parts list of this machine, log
into the Internet under "http://www.wuerth.com/
partsmanager" or ask for a copy at your nearest
Würth branch office.
Disposal
Disposal of sealant applicator, battery and charger
should be according to local waste authority rules.
Only for EC countries:
Do not dispose of power tools into
household waste!
According to the European Directive
2002/96/EC on waste electrical
and electronic equipment and its in-
corporation into national law, power tools that are
no longer suitable for use must be separately collect-
ed and sent for recovery in an environmental-friend-
ly manner.
Defective or dead batteries must be recycled accord-
ing to the directive 91/157/EEC.
Warranty
For this Würth tool, we provide a warranty in ac-
cordance with statutory/country-specific regulations
from the date of purchase (proof of purchase by in-
voice or delivery note). Damage that has occurred
will be corrected by replacement or repair.
Damage caused by normal wear, overloading or
improper handling is excluded from the warranty.
Claims can only be accepted if the power tool is sent
undisassembled to a Würth branch office, your
Würth sales representative or a customer service
agent for Würth compressed-air and power tools.
12
Declaration of Conformity
We declare under our sole responsibility that this
product is in conformity with the following stand-
ards: EN 60745, EN 55014-1:2006,
EN 55014-2:1997 + A1:2001 EN 61000-3-2,
EN 61000-3-3, EN 61000-6-1, EN 61000-6-3. In
accordance with the Directives 98/37/EC,
2006/95/EC, 2004/108/EC (previously
89/336/EEC as amended by 92/31/EEC,
93/68/EEC).
09
Adolf Würth GmbH & Co. KG
P. Zürn
Subject to change without notice
A. Kräutle