Parts Identification; Electrical Connection; Installation - Ningbo XPB68-2000S Bedienungsanleitung

1. Control Panel
3. Lint Filter
5. Wash Tub Lid
7. Spin Tub Lid
9. Power Cord
11. Drain Hose
Rated input power
Model
Wash Spin
XPB68- 360W 160W
2000S
XPB75- 360W 160W
2001S

Electrical Connection


he unit is designed to operate from an adequate power supply mentioned in the rating label sticked
at the back of the washing machine.
 The power cord plug must be connected to an earthed 3-pin power point.
 If the power cord is damaged, it should be replaced by an appointed qualified technician from the
manufacturer/distributor fo this product.
Connection of Water Inlet Hose

Attached the water inlet hose to the water inlet (please refer to Parts Identification for the location).
Caution: Please use water below 50°C.
 The drain hose should be placed flat on the ground. Water flow will be blocked if any portion of the
drain hose is raised 20 cm (8 inches) from the ground.

Parts Identification

Chief technical date
Rated power Energy effiency grade: 5
supply
Wash clean rate: ≥0.7
Volta Freq. Consume electricity
ge (KW/cycle/kg)
220V 50Hz ≤0.03
220V 50Hz ≤0.03

Installation

2. Water inlet
4. Pulsator
6. Outer Case
8. Spin Tub
10. Plastic Spin Mat
Dimension
Consume water LengthxWidth
(L/cycle/kg) xHigh
≤36 715x455x830
(mm)
≤36 795x455x865
(mm)
Net weight Input Water pressure
Mpa
17kg 0.05~0.3
20kg 0.05~0.3