Überprüfung Der Installationsanweisungen; Modbus Register Maps - Sentera Odthm Montage- Und Bedienungsanleitung

ODTHM
ÜBERPRÜFUNG DER INSTALLATIONSANWEISUNGEN

MODBUS REGISTER MAPS

INPUT REGISTERS
1 Temperature reading
2 Relative humidity level
3 Dew point
4
5 Ambient light intensity
6 Active / standby
7—10
Output value 1
11
(temperature)
Output value 2 (relative
12
humidity)
13
14 Temperature alert flag
15 Relative humidity alert flag
16
17 Temperature range limit flag unsigned int.
Relative humidity range
18
limit flag
19
Humidity / temperature
20
sensor fault
21
22 Ambient light sensor fault
MIW-ODTHM-DE-000 - 01 / 06 / 18
KOMBINIERTER T UND RH
AUSSENTRANSMITTER
Falls das Gerät nicht funktioniert wie erwartet, überprüfen Sie bitte die Anschlüsse.
Data type Description
signed int. Actual temperature level
unsigned int. Actual relative humidity level
signed int. Calculated dew point
Reserved, returns "0".
unsigned int. Measured light intensity
Active or Standby indication according the Active /
Standby light level defined via holding registers 34
unsigned int.
and 35. If the measured light level is between the
two levels the indication is 0 (Low intensity)
Reserved, return "0".
unsigned int. Analog output value for temperature (T )
unsigned int. Analog output value for relative humidity (rH)
Reserved, returns "0".
Flag indicates that measured temperature is outside
set alert values. Set to '1' when the measured value
unsigned int.
is outside the temperature alert values defined by
holding registers 20 and 21.
Flag indicates that measured relative humidity
is outside set alert values. Set to '1' when the
unsigned int.
measured value is outside the relative humidity alert
values defined by holding registers 22 and 23.
Reserved, returns "0".
Flag indicates that measured temperature is outside
set range limit values. Set to '1' when the measured
value is outside the temperature range limit values
defined by holding registers 14 and 15.
Flag indicates that measured relative humidity is
outside set range limit values. Set to '1' when the
unsigned int.
measured value is outside the relative humidity limit
range values defined by holding registers 16 and 17.
Reserved, returns "0".
Flag indicates if the communication with the
unsigned int.
temperature and humidity sensor is lost.
Reserved, returns "0".
Flag that shows if the communication with the
unsigned int.
ambient light sensor is lost.
Zurück zu Inhaltsverzeichnis
Data
-300—700
0—1.000
-700—700
0—32.000
0—1.000
0—1.000
www.sentera.eu
Values
500 =
1.000 =
200 =
1.000 =
0 =
0—2 1 =
2 =
0 =
1.000 =
0 =
1.000 =
0 = Measured temperature is OK
0—1
1 = Measured temperature is too high/ low
0 =
0—1
1 = Measured rH is too high/ low
0 = Temperature range is OK
0—1
1 = Temperature range is too high/ low
0 =
0—1
1 = rH range is too high/ low
0 =
0—1
1 =
0 =
0—1
1 =
50,0 °C
100,0 % rH
20,0 °C
1.000 lx
Low light intensity
Active
Standby
0 %
100 %
0 %
100 %
Measured rH is OK
rH range is OK
No
Yes
No
Yes
8 - 10