AbleNet BIG Step-by-Step Serie Kurzanleitung

Quickstart Guide:
BIG Step-by-Step™ and LITTLE Step-by-Step™
communicators
LITTLE/BIG Step-by-Step
LITTLE/BIG Step-by-Step
www.ablenetinc.com
3
Select Level / Enter Record Mode
Press and Hold,
then Release
Levels switch
(applicable models)*
LITTLE Step-by-Step w/Levels shown
Select Desired level (applicable models) using the Level
switch on the side of the device. Press and Hold the
RECORD button until the RECORD Light activates, then
release.
1
Choose your Switch Color
TM
TM w/Levels
Firmly, rotate the colored switch top counter-clockwise
to remove. Attach a new color by rotating the cap
clockwise until it stops.
A Snap Switch Cap is included with your BIG or LITTLE
Step-by-Step. Place a picture or symbol on the switch top,
and secure by snapping your Switch Cap over it.
4
Record a Series of Messages
Repeat
RECORD OFF SWITCH TOY/APPL.
Press and Hold the switch top, begin speaking when you
hear a beep. Release when finished. Repeat for
additional messages in a sequence.
Note: RECORD Light will flash while recording.
2
Insert Batteries and Turn On
On
Connect one 9-volt battery at the bottom of the device.
Rotate the Volume ON/OFF knob to turn the device on.
The LITTLE Step-by-Step includes a detachable Mounting
Base that must be removed to access the battery door.
Press the tab and slide to remove the base.
5
Exit Record Mode
Repeat
Press and Release
Press and Release the RECORD button to exit Record
Mode. Your BIG or LITTLE Step-by-Step is ready for use.
NOTE: Depending on your model, your device will have either
2 minutes or 4 minutes of recording time. The RECORD light
will turn yellow and flash when only 10 seconds of recording
time remains.
On
RECORD OFF SWITCH TOY/APPL.