Conceptronic C300EXi Benutzerhandbuch Seite 13

ENGLISH
The Wireless Utility automatically detects which security level is used on your wireless network.
Unsecured Network:
If your wireless network is unsecured, the Wireless Utility will establish a connection with your wireless
network.
Note : If you are connecting to your own network and it is unsecured, we advise you to add security to
your network to prevent unauthorized access to your network.
See the documentation of your Wireless Router/Access Point how to setup your network security.
Secured Network:
If your wireless network is secured, the Wireless Utility will ask you for the encryption key or pass phrase,
depending on the configured security level of your wireless network:
• Verify if the detected Authentication Type and Encryption matches your wireless network security.
• Enter the pass phrase in the "WPA Preshared Key" field when you are using WPA security, or enter the
WEP encryption key in the "Wep Key" field when you are using WEP security.
• Click "OK" to connect to the selected wireless network.
Note : When using Windows Vista, click the "Activate" button in the main window of the Wireless Utility
to connect to the wireless network.
You are now connected to the wireless network. The Wireless Utility will indicate the signal strength in
your system tray:
13