Werbung
Verfügbare Sprachen
Verfügbare Sprachen
GB
To set the stamp wheels Fig.
A
Press the handle
travel, then while still holding it.
Press and hold button
A
Allow the handle
the handle locks in place.
You will be able to move the stamp wheels
freely with the stylus
In order to return to the print position,
simply push down on handle
You can easily place the date one day further
ahead! (Not valid for the stamp Model N41a.)
Press the switch button
To insert the inkpad Fig.
Handle with caution to avoid dirt from ink!
Press the handle
A
travel, then, while still holding it.
B
Press the button
continue to hold it.
A
Allow the handle
handle locks in place.
Unpack the inkpad carefully.
Squeeze the grips
inkpad and hold them.
Resting the back of the ink pad inside the
pad cradle slide the pad into the slot
the stamp.
In order to return to the print position,
simply push down on handle
1
2
+
to the bottom of its
B
on the front plate
to move upwards until
C
.
A
.
F
once.
1
4
+
to the bottom of its
on the front plate and
to move upwards until the
I
on the back of the
J
A
.
3
+
To change the numbering actions Fig.
Actions
0
1
D
2
Press the switch lever
desired action.
To park the stamp Fig.
To prolong the life of the inkpad,
park the stamp!
Press and hold button
Gently push handle
stamp clicks & locks in a raised position.
In order to return to the print position,
simply push down on handle
of
The same number is stamped every time.
Number increases after each stamping
process.
Number increases after every 2
stamping process.
etc.
E
B
A
downwards until the
GB
3
nd
and slide it to the
5
on the front plate.
A
.
Werbung
