Werbung
5. Follow the Wizard's on- screen instructions to complete the
installation.
To install the ATI enhanced driver for Windows 2000 or
WindowsXP
:»
Please uninstall any existing video drivers that could possibly create a
conflict before attempting to install this VGA card.
:»
Please install the A GP driver provided by the motherboard company
before you install VGA driver.
Note:
• If
the motherboard based on VIA chipset, please set the
motherboard AGP Mode to IX Mode before you install AGP card
driver for windows XP. You can change the VGA setting back to
4X after you installed VGA driver.
• Before you install VGA driver for Windows 2000, please install
Microsoft Service Pack first.
I. Start Windows.
2. When Windows detects your ATI graphics card, the Fouud New
Hardware Wizard dialog box appears.
3. Click Cancel to enter the Windows desktop.
4. Insert the CD installation disc into your CD-ROM drive.
5. Click Start.
6. Select Run.
7. Type the following:
D:IATISETUP.EXE
(lfD is not your CD-ROM drive, substitute D with the correct drive
letter.)
8. Follow the on-screen instructions to complete the installation.
9. When Setup has finished installing all the necessary files on your
computer, it will prompt you to restart your computer. Click Yes and
Finish to complete Setup and restart your computer.
To install the enhanced driver and ATI PLAYER
for Windows NT 4. 0
Note: Before install Windows NT 4.0 Driver, Please install Microsoft
Service pack 5 (SP5) or later First.
3
I.
Start Windows® NT4.0
2. Switch the display to Windows'® Standard Display Adapter (VGA)
mode and then restart your computer.
3. Insert the ATI INSTALLATION CD-ROM into your CD-ROM drive.
If Windows NT runs the CD-ROM automatically. proceed to step 7.
4. Click Start.
S.
Select Run.
6. Type the following:
D:\ ATISETUP.EXE
OfD is not your CD-ROM drive, substitute D with the correct drive
letter.)
7. Follow the Wizard's on-screen instructions to complete the installation.
To connect a TV or VCR to your computer
I. Determine if your TV or VCR has an S-Video or a Composite video
connection.
2. Looking at the back of your computer, locate the corresponding video
out connector.
3. Using an S-video or a Composite cable, attach one end of the cable to
the video-out connector on your computer and the other end to your
TV or VCR.
Using TV Display (TV-out function optional)
Your graphics accelerator is configured for TV display. Using this
feature, you can connect a TV to your computer's video output to view
the desktop.
Tfyou are not using a TV for your computer's display, it is recommended
that you disable TV display for optimal performance (higher refresh
rates). You can re-enable TV display at a later date.
• For NTSC, 640x480x60Hz and 640x400x60Hz(hidden)
• For PAL, 640x480xSOHz and 800x600x50Hz(hidden)
• Low resolution modes but they are hidden and used by application
programs and cannot be select end user.
I. Click the Settings tab to view the Display Properties.
2. Click the Advanced button.
3. Click the Displays tab.
If you are running an extended desktop, you must first select the video
adapter whose display properties you want to change.
4
Werbung
