Switching The Roger Beep On/Off; Automatic Switch-Off - switel WT108 Bedienungsanleitung

3.10 Switching the Roger beep on/off

The Roger beep signals to the other caller that it is now possible to
speak. This signal tone on releasing the PUSH TO TALK button can
be switched on and off.
1. Press the MENU button briefly four times. The
flash.
2. The Roger beep can now be switched On and Off using the
! "
and
3. Confirm the selection with the PUSH TO TALK button on the left-
hand side or wait for 10 seconds until the display returns to the
normal operating mode once more.
When the Roger beep is activated, the
display.

3.11 Automatic switch-off

The radios are equipped with a device for prolonging the battery life. If
no transmissions take place within a certain time, the unit switches
itself off automatically.
1. Press the MENU button briefly five times. The
flash.
2. You can now make the following settings with the
buttons.
0 = Battery saving mode off
1 to 3 = Number of hours after which the radio will automatically
3. Confirm the selection with the PUSH TO TALK button on the left-
hand side or wait for 10 seconds until the display returns to the
normal operating mode once more.
When automatic switch-off mode is activated, the
appears in the display.
Note: You will hear a signal tone one minute before the radio is
switched off.
- Operation -
buttons.
be switched off.
indicator will
indicator appears in the
indicator will
!
indicator
"
and
47