Maintenance & Servicing; Warranty; Technical Specification - Bibby Scientific Stuart SRT6D Bedienungsanleitung

Maintenance & Servicing
WARNING: Ensure the unit is disconnected
from the mains electricity supply before
attempting maintenance or servicing.
Periodically clean the instrument using a damp
cloth and mild detergent solution. Do not use
harsh or abrasive cleaning agents.
Any repairs or replacement of parts MUST be
undertaken by suitably qualified personnel.
For a comprehensive list of parts required by
service engineers conducting internal repairs,
please contact the Service Department, quoting
both the model number and serial number:
E-mail: service@bibby-scientific.com
Tel: +44 (0)1785 810475
Fax: +44 (0)1785 810471
Only spare parts supplied or specified by
Stuart or its agents should be used. Fitting
of non-approved parts may affect the
performance of the safety features designed
into the instrument.
If in any doubt, please contact the Technical
Service Department of Bibby Scientific Ltd. or the
point of sale.

Technical Specification

Number of rollers
Speed
Amplitude
Maximum load
Controls
Timer
Roller size
(length x diameter)
Overall dimensions
(w x d x h)
Net weight
Electrical Supply
6
SRT6
6
33rpm
16mm
3kg
Analogue
No
340x30mm
565x240x110mm
5.1kg
230V, 50/60Hz
or
120V, 50/60Hz
For any other technical enquiries, please contact
the Technical Support Department:
E-mail: stuarthelp@bibby-scientific.com,
Tel: +44 (0)1785 810433.
Spares and Accessories
The following spares and accessories are available
from your laboratory dealer.
Description
Stacking system

Warranty

Bibby Scientific Ltd warrants this instrument to be
free from defects in material and workmanship,
when used under normal laboratory conditions,
for a period of three (3) years. In the event of a
justified claim Bibby Scientific will replace any
defective component or replace the unit free of
charge. This warranty does NOT apply if damage
is caused by fire, accident, misuse, neglect,
incorrect adjustment or repair, damage caused by
incorrect installation, adaptation, modification,
fitting of non approved parts or repair by
unauthorised personnel.
SRT6D
6
5 to 60rpm
16mm
3kg
Digital
Yes
340x30mm
565x240x110mm
5.1kg
230V, 50/60Hz
or
120V, 50/60Hz
Catalogue Number
SRT/STACK
SRT9
9
33rpm
16mm
3kg
Analogue
No
340x30mm
565x360x110mm
6.9kg
230V, 50/60Hz
or
120V, 50/60Hz
SRT9D
9
5 to 60rpm
16mm
3kg
Digital
Yes
340x30mm
565x360x110mm
6.9kg
230V, 50/60Hz
or
120V, 50/60Hz