Ribimex RibiTech IW1000 Bedienungs- Und Wartungsanleitung Seite 11

All bystanders (esp. children) should be kept away from tool and work area.
Keep the product away from children or from their environment. Never allow children to operate the
appliance. Children should be supervised to ensure that they do not play with the appliance.
5. Store idle tools
When not in use, tool should be stored in a dry, high or locked up place, out of reach of children.
6. Do not force the tool
It will do the job better and safer at the rate speed for which it is intended.
Do not use the product for purposes other than those for which it is intended. The product will do a
better and safer job if it is used only for the purposes it was designed for.
7. Use the right tool
Do not force small tools or attachments to do the job of a heavy duty tool.
Do not use tools for purposes not intended.
8. Dress properly
Do not wear loose clothing or jewellery; they can be caught in moving parts.
Wear protecting hair covering to contain long hair.
9. Use protective equipment
Wear protective equipment appropriate to working conditions and work environment
Wear protective helmet, safety goggles, ear mufflers, face or dust mask, rubber gloves and non-skid
footwear to reduce the risk of personal injury during products use or manipulation.
10. Do not abuse the power cable
Never carry the tool by the cable or yank it to disconnect it from the socket.
Keep the cable away from heat, oil and sharp edges.
Inspect tool cable periodically and if damaged have it repaired by an authorized service facility.
Inspect extension cords periodically and replace, if damaged.
11. Secure work piece
Use clamps or a vice to hold the work piece.
It is safer than using your hand and it frees both hands to operate the tool.
12. Do not overreach
Keep proper footing and balance at all times.
13. Maintain tool with care
Keep tool clean for better and safer performance.
Follow instructions for lubrication and changing accessories.
Keep handles dry, clean and free from oil and grease.
14. Disconnect tools
When not in use, before servicing and when changing accessories such as bits.
15. Remove adjusting keys and wrenches
Form the habit of checking to see that keys and adjusting wrenches are removed from the tool before
turning it on.
16. Avoid unintentional starting
Do not carry a plugged-in tool with a finger on the switch.
Ensure switch is off when plugging in.
17. Use of extension leads
When tool is used with extension cord, ensure that extension cord withstands tool ratings.
If used outdoors, use only extension cords intended for outdoor use.
18. Stay alert
Watch what you are doing. Use common sense.
Do not operate tool when you are tired, under the influence of alcohol, prescription medicines or
drugs.
19. Check damaged parts
Before further use or reuse of the tool, tool should be carefully checked to determine that it will
operate properly and perform its intended function.