Ebode SL08R/VS600R Bedienungsanleitung Seite 9

2. Place the IR extender on, or near, the television set.
3. To control the A/V equipment, use the original remote
control of your equipment (or a Universal remote control).
The remote must be aimed at the IR window of the IR
extender.
Problems and malfunctions
You don't receive the sounds and images on your TV:
•
Have you selected on your TV the SCART socket
corresponding to the receiver?
•
Have you set up the receiver and the transmitter on the
same channel?
•
Check that the transmitter and the receiver have not been
installed in reverse order (transmitter should be connected
to the source and the receiver to the screen).
•
Did you make sure that your receiver and your transmitter
are switched on?
•
Are the AC/DC adaptors correctly connected?
•
Are the sources (DVD player, SAT receiver,...) turned on?
The picture is scrambled:
•
Try another channel.
•
Move the receiver and transmitter a little bit.
The Audio/Video source is not controllable:
•
Check the batteries inside the IR extender
•
Is the infrared LED of the Audio/Video source located in
front of its infrared receiver? Move the Led in order to find
the most appropriate spot.
P/N 033000=14053 revision 01-07-06 SCART Link
9