Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3.
Insert the infrared cable at the side of the transmitter and
stick the LEDs on the infrared receiver of the A/V sources.
4.
Switch on the transmitter using the On/Off button.
5.
Select a channel (A-D).
6.
Turn on the A/V source you want to transmit the images and
sound from.
Setting up the SCART Audio/Video Receiver
1.
Link the 6 Volts input of the receiver with the AC/DC adapter
that you will then plug into a standard 230 Volts electric
socket.
2.
Connect the SCART Video Sender to the SCART socket of
your TV
3.
Switch on your receiver using the On/Off switch.
4.
Select the A channel.
5.
Switch on the TV and, using your TV remote control, select
the SCART input which the SCART video sender is
connected to.
Note: The transmitter and the receiver that you want to link
should be set up on the same channel.
Setting up the IR extender
1.
Insert 2 AAA alkaline batteries:
-
Open the cover on the back of the IR extender.
-
Check the +/– polarity inside the compartment.
-
Insert the batteries.
-
Close the cover.
P/N 033000=14053 revision 01-07-06
SCART Link
8
Werbung
