Adax NEO 1 s4 Bedienungsanleitung Seite 8

Basic functions
When the heater is switched on
for the first time, the display
will show 20 degrees and the
heater will immediately start
working.
Automatic saving of the
comfort temperature setting
NB! Each time a new comfort
temperature is selected using
the and buttons, this
latest choice will be auto-
matically saved. After lengthy
power cuts the last selected
setting is resumed.
HOME MODE (HO):
Start nighttime temperature cutback
At the time of evening you wish temperature cutback to
start, press the button for more than five seconds.
h (hours) will flash three times in the display and then 7
will flash continuously. With the
number of hours you want the temperature cutback period
to last. When your selection is displayed, confirm it by
pressing the button briefly.
°C will flash three times and then 17 (°C) will flash contin-
uously. Using the or
you wish for the cutback period. When your selection is
displayed, confirm it by pressing the
Lamp will now flash slowly to indicate that tempera-
ture cutback is active. The temperature is reduced for
the number of hours you have chosen, and this will be
repeated for the same period every night.
Start daytime temperature cutback
At the time you wish temperature cutback to start, press
the button for more than five seconds.
h (hours) will flash three times and then 5 will flash
continuously. Using the
of hours you want the temperature cutback period to last.
When your selection is displayed, confirm it by pressing
the button briefly.
d will flash three times and then a random number. Using
the or button, enter the correct day of the week
(Monday = 1, etc.). Confirm by pressing the
briefly.
°C will flash three times and then 17 (°C) will flash contin-
uously. With the or
back temperature. Confirm by pressing
Lamp will now flash slowly to indicate that daytime
temperature cutback is active. The temperature is reduced
to your selected setting for the number of hours you have
chosen. This will be repeated for the same period every
weekday, leaving Saturday and Sunday unaffected.
8
NEO s4
3
2
1
4
or button select the
button, select the temperature
button briefly.
or button, select the number
button
button select your preferred cut-
button briefly.
OFFICE MODE (OF):
To enter office mode hold down
than five seconds until OF flashes and 20 (°C) is displayed.
Starting the temperature cutback function
Three hours before you usually leave the office press and
hold down the
PM).
h (hours) will flash three times in the display, then 12 will
flash. Select the number of hours you want temperature
cutback to last by pressing the
by pressing briefly. (NB! Cutback will start after three
hours.)
d (day) will flash three times, then a random number will
be displayed. Enter the correct day using the
ton (Monday = 1, etc.). Confirm by pressing
cL (time of day) will flash three times, and 16 is displayed.
Use the or
the day. Confirm by pressing
°C will flash three times and then 16 is displayed. With the
or button, select your preferred cutback tempera-
ture. Confirm by pressing the
Comfort temperature will continue for three hours before
the cutback period starts automatically.
(E.g. Pressing
cutback start at 17:00 – 5 PM and the lamp will flash slowly.
During the three hours before cutback start the lamp is lit
steadily.)
Working overtime
When working overtime the cutback function may be
overridden. Press the
The set comfort temperature will be displayed. Lamp
will light steadily while lamp
temporary period of comfort temperature will last for five
hours.
UK/AU/NZ
USER GUIDE
1 Heat on/off
2 Desired (set) temperature
3 Daytime cutback indicator
4 Nighttime cutback indicator
Up and Down buttons
Function button
Night temperature cutback (7 days)
Day temperature cutback (5 days)
and press
button for five seconds (e.g. at 14:00 – 2
or button. Confirm
button to enter the closest whole hour of
briefly.
button briefly.
at 14:00 – 2 PM – will make temperature
button for more than five seconds.
continues to flash. This
for more
or but-
briefly.