Connecting The Camera To A Network; Calling Up The Camera Via A Computer - Monacor INC-1500THERM Bedienungsanleitung

⑥

6 Connecting the Camera to a Network

To be able to directly address the camera for configuration via a
computer, its IP address is factory-set to 1921680121
If you do not know the current address of the camera, start the
program "IPSearchexe" from the CD provided to find the camera
in the network
1) To start the search, click the button "Start" of the tab "Multicast
Search" The list on the left will show the cameras found in the
☞
network ( fig 6)
2) To stop the search, click the button "Stop"
3) Select the camera from the list The current settings of this
camera can be found on the right
4) Change the settings as required:
IP address, subnet mask and gateway address can be defined
as static values (select the option "Device uses the following IP
address") Enter a unique IP address for each camera If a DHCP
server is available in the network (e g in the router or network
video recorder), this server will be able to automatically make
settings for the camera (select the option "Device obtains an
IP address automatically") The values assigned automatically
are highlighted in grey and cannot be changed
5) Click the button "Modify" After successful transmission of
the modifications, the message "Modify success!" will appear
6) Before you start a new search, click the button "Clear All" to
delete the list
14

7 Calling up the Camera via a Computer

To call up the user interface of the camera, enter its IP address
in the address bar of the program Windows Internet Explorer (IE,
version 6 or higher) The IP addresses of the computer and of the
camera must be in the same subnet The number of simultaneous
accesses to the camera is limited to 6
When the camera is called up, the log-in window will appear
Select the language for the user interface The description below
refers to English Then enter the user name and the password
(default setting for both: admin) Individual log-in data can be
defined later in the camera settings
Important: To prevent unauthorized access, change at least the password
The Flash Player extension from Adobe provided on many comput-
ers (also available on the CD provided) will allow a basic display of
the camera image Faster image transmission and availability of all
functions, however, requires installation of the ActiveX extensions
These extensions will be loaded from the camera when the Flash /
ActiveX line g (
☞ fig 7) is clicked for the first time If necessary,
reduce the security settings of the IE accordingly to allow the in-
stallation process Save the installation file "webPluginsexe" to
the computer, close the IE and execute the file
Windows is a registered trademark of Microsoft Corporation in the USA and other countries.