Features; Battery - Fluke Networks MicroMapper Benutzerhandbuch

Features

• Tests for wiring faults and detects opens, shorts,
crossed, reversed, and split pairs. (Split pair fault
detection requires a minimum cable length of 15.75"
(40cm))
• Verifies shield integrity
• M M
ICRO APPER
person to test installed cabling
• Easy to read fault display and high speed testing
• Generation of two tones for tracing cables and
locating hidden cables
• Debug-mode for detailed fault identification results
• Auto-sleep mode to decrease power consumption

Battery

M M
ICRO APPER
battery.
M M
ICRO APPER
' Remote Identifier enables one
S
requires a 6 Volt Alkaline or Lithium
The Battery LED will light up
when M
low battery condition. Using
M
may effect the test accuracy. If
M
than one month, the battery
should be removed.
TM
M
ICRO
M
ICRO APPER
M
ICRO APPER
detects a
APPER
with a low battery
is stored for more
ENGLISH - 3