Quax 54 04 47 Serie Handbuch Seite 39

SUNNY
54 04 47xx
Step 7 : Use the right side 2R and the upper crossbar 3 of step 1, the parts of step 3 and fi ve eccentrics D
Insert three eccentrics (D) into the drillings underneath the bottom. Insert one eccentric (D) into the drill-
ing at the bottom of the rear leg. Push the construction over the connectors of the side and tighten the
eccentrics. Insert one eccentric (D) into the drilling of the upper crossbar (3). Push the crossbar over the
connector of the side and tighten the eccentric.
Step 8 : Use the left side 2L, the parts of step 7, both backs 4, the connecting profi le 14 and fi ve eccentrics
D
Slide a back (4) in the slots of the rear leg and the upper crossbar. Next the connection profi le (14) and the
remaining back. Insert three eccentrics (D) into the drillings underneath the bottom. Insert one eccentric (D)
into the drilling at the bottom of the rear leg. Insert one eccentric (D) into the drilling of the upper crossbar
(3). Push the left side (2L) with its connectors into the holes of the construction and tighten the eccentrics.
Kleerkast met twee draaideuren
Schrankwand mit zwei Türen
Armoire avec 2 portes battantes
Wardrobe with two doors
Quax
First dreams
®
First steps
39