Hama 00083210 Bedienungsanleitung Seite 4

G Operating instruction
Thank you for choosing a Hama product.
Take your time and read the following instructions and
information completely. Please keep these instructions
in a safe place for future reference. If you sell the
device, please pass these operating instructions on to
the new owner.
1. Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions or
to draw your attention to specific hazards and risks.
Note
This symbol is used to indicate additional
information or important notes.
2. Package Contents
• Wireless HDMI Screenshare Adapter
• Removable antenna (0.5 m connection cable)
• 5 V USB cable (0.8 m)
• These operating instructions
3. Safety Notes
• The product is intended for private, non-commercial
use only.
• The product is intended for indoor use only.
• Use the product for its intended purpose only.
• Protect the product from dirt, moisture and
overheating, and only use it in a dry environment.
• Children should be supervised to ensure that they do
not play with the device.
• Do not use the product in areas where the use of
electronic devices is not permitted.
• Lay all cables so that they do not pose a tripping
hazard.
• Do not bend or crush the cable.
• Do not drop the product and do not expose it to any
major shocks.
• Dispose of packaging material immediately
according to locally applicable regulations.
• Do not modify the product in any way. Doing so
voids the warranty.
2
Warning
• Do not attempt to service or repair the product
yourself. Leave any and all service work to
qualified experts.
• Do not open the device or continue to operate it
if it becomes damaged.
4. Technical Data
Supply voltage
Rated power
consumption
Ambient temperature
5. Startup and Operation
• After removing the protective cap, insert the wireless
screenshare adapter in the HDMI port of your
television and connect the wireless screenshare
adapter using the USB/micro USB cable provided to
a USB port, e.g. directly on the TV (Pic. 1).
• If your television does not have any free USB ports,
you can power the wireless screenshare adapter
using a standard USB power supply unit (5 V, min
500 mA) (Pic. 2).
• Connect the additional antenna provided to the
wireless screenshare adapter and position it such
that it is within eyeshot of your mobile playback
device (Pic. 3).
Note
The screenshare adapter can also be operated
without the additional antenna. The antenna solely
serves to increase the range and to stabilise signal
transmission.
• Switch your television to the desired HDMI input
source (e.g. HDMI 1). The following screen should
now appear on your TV.
5 V; micro USB input
450 mA
-20 to +40 °C