Hauck Glider Recline Gebrauchsanweisung Seite 10

Instructions
GB
1. Assembly of the backrest with the armrests (fi gure 1)
Fasten the armrest on the backrest with the supplied bolts and plain washers, as
described in fi gure 1. Use the allen key for this purpose and take care that the fastenings
are fi rmly seated.
2. Assembly of the back- and armrest with the undercarriage (fi gure 2)
Now fasten the armrests on the undercarriage by using the allen key. Four bolts from the
top side and two bolts with two spindles from the bottom side, as described in fi gure 2.
3. Fitting the upholstery
Fasten the back upholstery and seat upholstery by tying up the cords on the backrest
and seat. Attach the armrest upholstery to the armrest by buttoning the buttons along the
interior seat and on the sides.
4. Ottoman
No assembly is needed for the supplied ottoman.
1
2 3
11