Chauvet WELL Pad Schnellanleitung Seite 5

Main Level
Dimmer Mode
Back Light
Information
DMX Address
DMX Channel
Master/Slave
White Balance
Manual
LED
Frequency
Receive On/
Off
Wireless
Setting
Receive
Reset
IR Setting
Key Lock
Reset Factory
WELL Pad QRG Rev. 1
QUICK REFERENCE GUIDE
Programming Levels
Off
Dimmer 1–3
On
10S
20S
30S
Fixture Hours <_ _ _ _H> Shows total hours the product has been powered on
Version
<1–510>
4Ch
6Ch
10Ch
HSV
HSI
Master
Slave
Off
Red <125–255>
Green <125–255>
Blue <125–255>
600Hz
1200Hz
2000Hz
4000Hz
6000Hz
25KHz
On
Off
No
Yes
On
Off
On
Off
No
Yes
Description
Linear dimmer
Dimming curves Dimmer 1 (fast) to Dimmer 3 (slow)
Display backlight always on
Turns off display backlight after 10 seconds of inactivity
Turns off display backlight after 20 seconds of inactivity
Turns off display backlight after 30 seconds of inactivity
<V_._> Shows current firmware version
Selects DMX address (highest channel restricted to
personality chosen)
4-channel: RGBA control
6-channel: Dimmer, RGBA control, Strobe
10-channel: Dimmer, RGBA control, Strobe, Color Macros,
Auto Programs, Auto Speed, Dimmer Speed Mode
3-channel: Hue, Saturation, Value
3-channel: Hue, Saturation, Intensity
Master mode (Standalone)
Slave mode (DMX)
Disables white balance settings
Sets red, green, and blue LED maximum values.
PWM frequency
Enables/disables wireless DMX
Resets the wireless setting
Enables/disables IR receiver
Locks display (password is <UP>, <DOWN>, <UP>,
<DOWN>, <ENTER>)
Resets the product to factory default settings
EN
4