Problems & Solutions - Inventum IKI6033 Gebrauchsanweisung

9
problems & solutions
If there is an error, an error code will be shown at the displays.
Error code Cause
E1 Cooling fan is disabled.
E3 Supply voltage is too high.
E4 Supply frequency is different from the rated values (50Hz).
E5 The hob is overheated.
E6 Control defect.
E7 Coil temperature sensor is defect.
E8 Cooler temperature sensor is defect.
E9 Calibration error.
32
• English
Solution
Contact the service department of Inventum.
Have the installation checked by a qualified electricien.
Have the installation checked by a qualified electricien.
Switch the appliance off and let the cooking zones cool down.
Contact the service department of Inventum.
Contact the service department of Inventum.
Contact the service department of Inventum.
Contact the service department of Inventum.