Rebell SC2060S Benutzerhandbuch Seite 20

LinelO: A linear mode that displays notation in a single line.
Deg: Setting of angular units to degrees.
Rad: Setting of angular units to radians.
Gra: Setting of angular units on gradians.
Fix: A fixed number of decimal places (0 to 9).
Sci: Scientific notation (0 to 9).
Norm: Specifies whether the results will be displayed in non- / exponential
format.
ab/c: Displays fractions in mixed form.
d/c: Displays fractions in improper form.
STAT: Switching on or off the display of frequency tables.
Disp: Sets the mode of separating decimals with a dot or comma.
◄CONT►: Contrast adjustment.
Using the mathematical mode
Press [2ND][MODE/SET UP][1] to select the mathematical mode. In the
mode, values and functions, such as d/e, Ab/c, log
x , will be displayed in a standard mathematical notation. In Rebell SC2060S
–1
calculators, the mode is set by default.
Mathematical mode
Display formats
The calculator enables setting of the following display of numbers:
Fixed number of decimals
To determine the number of decimals, press [2ND][MODE/SET UP][6] and
choose one of the options (0~9). The data will be displayed with a fixed number
of decimals.
Scientific displays
The value is displayed in exponential form. Mantissa is displayed with a pre-set
number of decimals. The scientific display is set by pressing [2ND][MODE/SET
UP][7] and choosing (0~9) to set the number of decimals.
Ordinary notation
Press [2ND][MODE/SET UP][8] and choose Norm1 (pre-set) or Norm2 to
determine display capacity and display result in non-exponential (within range)
or exponential (out of range) form.
Modus Norm1: 10
Modus Norm2: 10
Technical display in exponential form
Press [ENG] or [2ND][←] to set exponential number display, the change of the
exponent will be a multiple of three.
> l x l , l x l ≥ 10
–2
> l x l , l x l ≥ 10
–9
b, Abs, 10
a
10
10
3–EN
, e , √,
x x
Linear mode
√, x , x ,
3 2 3