Application
1.
The external HDD/SSD can be connected to or disconnected from the
computer via USB cable without shutting down the computer.
2.
Please await the end of read/write operations before disconnecting the
HDD to avoid data lost.
3.
A new HDD/SSD must first be initialised, partitioned and formatted by
the operation system to be displayed by the system.
4.
If the hard disc isn't recognised instantly by the operating system please
check:
- if the driver software is installed (USB),
- if the HDD/SSD is initialised, partitioned and formatted.
Verpackungsinhalt
1x IB-236-C3, 1x USB 3.0 Kabel, 1x Schutzhülle, 1x Handbuch
Hauptmerkmale
•
Externes Gehäuse für 2,5" SATA HDD/SSD
•
Anschluss zum PC: USB 3.0 Type-C™ mit UASP bis zu 5 Gbit/s
•
Für 7 / 9,5 mm HDD/SSD, keine Kapazitätsbeschränkung
•
Werkzeuglose Installation
•
Windows, macOS, Linux kompatibel
Festplattenmontage
Beim Ein- und Ausbau der Festplatte müssen alle Kabelverbindungen zum
Computer gelöst werden.
Manual IB-236-C3