Werbung
Verfügbare Sprachen
Verfügbare Sprachen
General
Position the sensors in your garden or around the house and be
informed by the receiver (vibration, sound, or light) if someone
enters your property. Pay attention to the max. range of the sensors.
How to connect the receiver and sensor
When the receiver and Sensors are powered on, the Sensors will be
connected to the receiver wirelessly and automatically, its
corresponding signal indicator (1,2,3,4,5) will blink for 15 seconds
with sound and vibration, then keep in green color. The maximum
connecting distance is up to 100m in an open environment.
Additional Sensor
It is possible to connect up to 5 sensors with one receiver. The
sensors will wirelessly and automatically connect to the receiver. If
you need three more sensors, search for "3-Motion Detection
Sensor Set TX-105".
How to alarm
1
Sound alarm
Vibration alarm
2
3
LED light alarm
After the receiver and sensors are powered on and connected
successfully, when the sensor is triggered by any motion, its
corresponding signal indicator on the receiver blinks for 15 seconds
with sound and vibration alarm, then keep in green color till next
trigger.
Werbung
