Technical Specifications - EuroLite B-100 Bedienungsanleitung

Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Open the fuse-holder on the rear panel with a fitting screwdriver.
Step 2: Remove the old fuse from the fuse-holder.
Step 3: Install the new fuse in the fuse-holder.
Step 4: Replace the fuse-holder in the housing.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply
cable available at your dealer.
Should you have further questions, please contact your dealer.

TECHNICAL SPECIFICATIONS

Power supply:
Power consumption:
DMX-control-channels:
DMX-512-connection:
Tank volume:
Dimensions (LxWxH):
Weight:
Fuse:
Accessory:
TPC-10 Coupler, silver
Safety bond AG-5 3x600mm up to 5kg
DMX cable XLR 3pin 3m bk Hicon
XLR plug 3pin 110 Ohm
Bubblefluid 1l
UV-bubblefluid 1L yellow
UV-bubblefluid 1L red
UV-bubblefluid 1L blue
UV-bubblefluid set 3x1l
Bubble-concentrate for 5l
UV-bubblefluid 5l yellow
UV-bubblefluid 5l red
Spare-ring for bubble-machine
SB-4 Soft-Bag
weather-proof protection box outdoor
Please note: Every information is subject to change without prior notice. 13.01.2016 ©
230 V AC, 50 Hz ~
16 W
2
3-pin XLR
0.6 l
230 x 260 x 300 mm
2.3 kg
F 0.5 A, 250 V
No. 59006856
No. 58010360
No. 30227811
No. 30208430
No. 51705280
No. 51705210
No. 51705212
No. 51705214
No. 51705215
No. 51705300
No. 51705220
No. 51705222
No. 51705150
No. 30130501
No. 30236255
17/17 00092767.DOC, Version 1.1