Technical Specifications - EuroLite BH-200 Bedienungsanleitung

Procedure:
Step 1: Unscrew the fuseholder on the rearpanel with a fitting screwdriver from the housing (anti-
clockwise).
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing and fix it.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply
cable available at your dealer.
Should you have further questions, please contact your dealer.

TECHNICAL SPECIFICATIONS

Power supply:
Power consumption:
Tank volume:
Dimensions (LxWxH):
Weight:
Fuse:
Accessory:
Eurolite bubble-concentrate for 5l
Eurolite bubble-fluid 1l
Eurolite uv-bubblefluid 1l yellow
Eurolite uv-bubblefluid 1l red
Eurolite uv-bubblefluid 1l blue
Eurolite uv-bubblefluid set 3x1l
Eurolite uv-bubblefluid yellow 5l
Eurolite uv-bubblefluid 5l red
Eurolite uv-bubblefluid 5l blue
Safety bond ag-35fa 6x1000mm up to 35kg
Please note: Every information is subject to change without prior notice. 04.04.2011 ©
230 V AC, 50 Hz ~
70 W
approx. 3.5 l
415 X 345 X 260 mm
8 kg
F 0.5 A, 250 V
No. 51705300
No. 51705280
No. 51705210
No. 51705212
No. 51705214
No. 51705215
No. 51705220
No. 51705222
No. 51705224
No. 58010368
14/24 00026577.DOC, Version 1.2