Troubleshooting; Technical Specifications - Reflexion DVD1017 Bedienungsanleitung

First Time Installation
USB
To access the Menu, press the
Multi-Media
Switch to USB mode and plug in USB to view files.
Photo Configure
Set the parameters for viewing photographs.
Movie Configure
Set the parameters for displaying movie subtitles.

Technical Specifications

Item Sub Item
Input Frequency
Tuner
RF Input level
IF Bandwidth
Modulation
Decoder Format
Video
Output Format
Output Port
SETUP button and select USB.
Parameter
170~230MHz
470~860MHz
-79dBm(T),-75dBm(T2)
7MHz and 8MHz
QPSK,16QAM,64QAM,128QAM(T2),256QAM(T2)
MPEG4 AVC/H.264 HP@L4
HEVC/H.265 HT@L4
MPEG2 MP@ML.HL
480i, 480p,576i, 576P, 720P, 1080i, 1080P,4:3 and 16:9
HDMI

Troubleshooting

Problem
Power isn't connected
No picture
The power switch
is not on
DVB-T cable not
Screen shows
connected
No Signal
Incorrect setting
No sound from
Sound on mute
speaker
Incorrect sound track
Only sound, no No or incorrect connection
image on the
with AV cable
screen
The program is a radio
program
Remote Control
The battery is exhausted
is not responding
Remote Control is not
facing or close enough
to the Set Top Box
The image stopped The signal is too weak
suddenly or mosaic
15
Potential Reasons What to do
Connect the power
Switch on the power
Plug in the DVB-T cable
Reset setting
Turn off mute function
Try another sound track
Make sure cables
connected correctly
Press <TV/RADIO> key
to shift into TV mode
Change battery
Adjust the position
Remote Control and
move closer to the unit
Strengthen the signal
are
of the