Guarantee Certificate - Monaldi Inox Betriebsanleitung Handbuch

GUARANTEE CERTIFICATE

The guarantee is valid, unless otherwise stated in writing, for a period of 12 months from delivery date.
For the parts not constructed by Manufacturer the guarantee is limited to that allowed by the supplier.
During the period of guarantee any parts which should be defective in material or workmanship, accor-
ding to the final decision of our Technical Office, will be replaced free of charge. All tests and checks for
defects and their causes will be carried out at our site.
Any expenses for checks on site carried out by Manufacturer, transport costs, packaging of any parts to
be repaired or replaced as well as the manpower hours will be paid by the buyer.
The guarantee will be considered invalid if components are repaired or replaced with spare parts which
are not original or when any work is done on the machine not according to the manual or without our
authorisation.
Any parts which are by their very nature or use subject to deterioration, wear and tear or bad mainte-
nance will not be covered by this guarantee.
The buyer will not be able to claim for damages of any nature however they may come about.
On delivery of the machine the buyer must check that it is as ordered and conforms to the contract and
that it has not been damaged in transport.
Should any such damage be evident then the buyer must not use the machine and must inform
Manufacturer directly or his supplier within 6 days.
Made up of:
1) Spray gun.
2) Nozzle.
3) Oil level gauge.
4) Loading plug.
5) Safety valves.
6) Ball tap.
7) Air pressure gauge.
8) Ball tap.
9) Spiral.
10) Tank.
instruction nebulizer inox
8/24 rev. 0.00