Mounting The Unit; Start-Up And Operation; Technical Data - Westfalia Rp-338 Bedienungsanleitung

Mounting the Unit

1. Mount the unit on the garage wall where you can see it from the driver's
seat either directly or in the rear-view mirror.
2. Use screws and wall plugs if necessary.
3. Mount the sensor on the wall in the same height as the car bumper. Use
either a screw or the included Velcro patch.

Start-Up and Operation

1. Set the ON/OFF switch to ON.
2. When a solid object approaches the sensor, the lights light up as follows:
Colour
Green
Yellow
Red
After 12 seconds without movement the unit turn off and will turn back on
upon movement.

Technical Data

Type
Batteries
Weight
Power Mains Adaptor Type
Input Voltage
Output Voltage
Protection Class
Safety Notes and Operation
Distance
61 – 100 cm
41 – 60 cm
less than 40 cm
RP-338
3 x LR6 (AA)
158 g
AD23901-28
230V~ 50Hz
9V 100 mA
II
4