Operating Instructions - Lester UNIPLAN S Bedienungsanleitung

Официальные поставки www.mikst.ru

Operating Instructions

Read the operating instructions carefully before starting
the device and keep them for future reference.
Leister UNIPLAN S; UNIFLOOR S
Automatic hot air welding machine
Application
• Leister UNIPLAN S; Automatic overlap welding machine (Welding seam width 20 or 30 mm
Overlap and tape welding of coated fabrics, foils and membranes made from PVC-P, PE, ECB, CSPE, EPDM, as
well as PE woven materials for truck covers, tents, covers for agriculture and construction, biotopes, swimming
pools, awnings, boat covers, inflatable boats, billboards, banners.
• Leister Unifloor S; Automatic flooring welding machine
Welding of PVC coverings and melt welding of linoleum floor coverings.
Warning
Caution
230
120
FI
(Translation of the original operating instructions)
Danger ! Unplug the tool before opening it, as live components and connections
are exposed.
Incorrect use of hot air tools can present a fire and explosion hazard, particularly
in the proximity of flammable materials and explosive gases.
Danger of getting burned! Do not touch the heater tube and nozzle when they are
hot. Let the tool cool down. Do not point the hot air flow in the direction of people
or animals.
Only connect the tool to a receptacle outlet with protective earth conductor.
Any disconnection of the protective earth conductor, in or outside the tool is
dangerous ! Only use extension lead with a protective earth conductor.
The rated voltage stated on the tool must correspond with the mains voltage.
Extract hot-air blower in case of power breakdown.
For personal protection, we strongly recommend the tool to be connected to an
RCCB (Residual Current Circuit Breaker) before using it on construction sites.
The device must not be left unattended when in use.
Heat can reach combustible materials which are out of sight.
The device may only be used by trained personnel or under their supervision. Chil-
dren may not use the device under any circumstances.
Protect the tool from damp and wet.
GB
11