J5create JUA310 Bedienungsanleitung Seite 24

The functions of the USB 3.0 Display Adapter will be activated after the
computer restarted. You might see the mirror display shown on the display
device.
You can modify the corresponding position of each extend display via
display settings.
Go to "START" → "Control Panel" → "Appearance and Personalization" →
"Display Properties" →"Settings"
Note:
If your internal graphics card is Dual Display Ports.....
1. When using one USB 3.0 Display Adapter
The display device which connected to the 2
numbered 3
3.0 Display Adapter will be numbered 2
2. When using two USB 3.0 Display Adapter
The display device which a port to the 2
numbered 4
3.0 Display Adapter will be numbered 2
23
monitor, the display device which connected to the USB
rd
monitor, the display device which connected to the USB
th
When Display Properties
windows appears, each
monitor's number can be
identified by clicking "
" identify"
Drag the monitor to the
location you want.
VGA/DVI port will be
nd
monitor.
nd
VGA/DVI port will be
nd
and 3 monitor and so on...
nd rd