Troubleshooting - h.koenig V6 Bedienungsanleitung

Problems Possible causes
Incorrect connection to
Iron won,t heat
the main socket
Handle has not been laid
down
Temp setting at "
position
Unknown malfunctions
Temp setting at NYLON
No steam go
position
out when
pressing
No water in water tank
steam switch
after the
Filter has not been well
desired
installed into water tank.
temperature
is reached.
Water tank has not been
well installed.
" <!> "
blink
Defects with internai
quickly,other
circuit, unit corne into
fabric indicator
self protect mode
turn off, buzzer
sound a "Bi".Ali
buttons are non-
workin. it will
resume when
re-energized
again.
Never dispose of your product with other household waste. Please inform yourself
about the local rules on the separate collection of electrical and electronic products.
The correct disposai of your old product helps prevent potentially negative
consequences on the environment and human health.
Adeva SAS / H.Koenig Europe - 8 rue Marc Seguin, 77290 Mitry-Mory, France
www.hkoenig.com - sav@hkoenig.com
Trouble shooting
Re-plug the unit to main socket.
Lay handle down
Select the required ironing
<!> "
temperature according to fabric
setting
Take to a qualified serviceman or
manufacturer or its service agent
for examination and repair.
Select the required ironing
temperature according to fabric
setting
Fill water into water tank
lnstall filter into water tank
SIide water tank into the power
base and it will be locked in place
until a "click" sound produced.
Re-energized the unit again. If
it still can not resume,please
take it to its service agent or
similarly qualified persans for
repair.
- contact@hkoenig.com
Solution
chart.
chart.
- Tél: +33 1 64 67 00 01