Troubleshooting; Disposal Considerations - h.koenig AIR800 Bedienungsanleitung

Cleaning:
• The air purifier should be cleaned at least once every month and the outer Pre-/Activated Carbon Filter
attached to the HEPA Filter should be cleaned every month. More frequent cleaning may be required de-
pending on environmental conditions.
• Clean the Pre-filter and the Activated Carbon Filter with the brush attachment of your vacuum cleaner. This
will remove lint and dirt. NOTE: The Combination Filter is one filter system. The multiple layers include: the
Pre-filter, Activated Carbon Filter and HEPA Filter.
• Use a clean, dry, soft cloth to wipe the external surface of the unit. CAUTION: Do NOT use gasoline, benzine,
thinner, harsh cleaners, etc. on and/or in the unit while cleaning as they will damage the product.
UV LAMP REPLACEMENT
1. Open the UV lamp cover by a screw driver.
2. Take off the UV lamp from the holder carefully
and unplug the connector.
3. Connect the new UV lamp to the connector and
fix back the lamp to the holder carefully.
Note: Do not watch the operating UV lamp directly.
Before carrying out any of the following service checks, unplug the unit from the mains.
Problem
Insufficient air flow.
Problem
Unit will not start.
Excessive noise.
According to the European waste regulation 2002/96/EC this symbol on the product
or on its packaging indicates that this product may not be treated as household waste.
Instead it should be taken to the appropriate collection point for the recycling of electrical
and electronic equipment. By ensuring this product is disposed of correctly, you will help
prevent potential
could otherwise be caused by inappropriate waste handling of this product. For more de-
tailed information about recycling of this product, please contact your local council or your
household waste disposal service.
Adeva SAS / H.Koenig Europe - 8 rue Marc Seguin - 77290 Mitry Mory - France
www.hkoenig.com - sav@hkoenig.com - contact@hkoenig.com - Tél: +33 1 64 67 00 01

Troubleshooting

Possible Cause
Check that the filters are clean.
Check for any obstructions in the air inlet and outlet.
Possible Cause
Check the power supply and electric fuses.
Check that the Front Cover is latched firmly in place.
Check that the Filter is firmly in place.
Check for any foreign objects in contact with the fan.
The filter may be clogged and ready for replacement.
The foam sealing gaskets have been installed incorrectly.
Uneven positioning.

Disposal Considerations

negative consequences for the environment and human health, which