General Safety Rules; General Power Tool Safety Warnings - SW Stahl PROFI Tools S3300 Benutzerhandbuch

GENERAL SAFETY RULES

Thank You For Buying A SW-Stahl tool
Manufactured to SW-Stahl high standard for dependability, properly cared for, it will give you years of trouble free performance .
Important:
Carefully read through this entire owner's manual before using your new tool . Pay close attention to the Rules for Safe Operation . Warnings and
Cautions . Use your tool properly and only for what it is intended.
The use of safety symbols in this manual it to attract your attention to possible dangers . The safety symbols, and the explanations with them,
require your full understanding . The safety warnings do not by themselves eliminate any danger, nor are they substitutes for proper accident
prevention measures .
SYMBOL : This Safety Alert Symbol indicates caution, warning, or danger . Failure to obey a safety
warning can result in injury to yourself or others. To reduce the risk of injury, fire, or electric shock
always follow the safety precaution
KNOW YOUR TOOL prevention
this owner's manual and all labels affixed to the tool .
Learn its applications and limitations as well as the potential
hazards peculiar to a power tool . Keep this manual readily
available for future reference .
IMPORTANT
Servicing of a tool requires extreme care and know ledge and
should be performed only by a qualified service technician . For
service or repair contact and Authorize Service Center .
CAUTION : Do not attempt to operate
this tool until your have thoroughly read
and completely understood all
instructions, safety rules, etc ., contained
in this manual . Failure to comply can
result in accidents involving fire, electric
shock, or serious personal injury . Save
the Owner's Manual and review
frequently for continuing safe operation
and for instructing others who may use
this tool .
WARNING : When using power tools,
basic safety precautions should always
be followed to reduce the risk of fire,
electric shock, and personal injury,
including the precautions following .
WARNING : Read all safety warnings
and all instructions Failure to follow all
warnings and instructions may result in
electric shock, fire and/or serious injury.
GENERAL POWER TOOL SAFETY
WARNINGS
Save all warnings and instructions for future reference
The term "power tool" in the warnings refer to your mains
operated (corded) power tool or battery operated (cordless)
power tool .
www.swstahl.de
www.swstahl.de
SW-Stahl GmbH
SW-Stahl GmbH
An der Hasenjagd 3
An der Hasenjagd 3
D-42897 Remscheid
D-42897 Remscheid
1) SAFETY
a ) Keep work area clean and well lit. Cluttered and dark
areas invite accidents .
b) Do not operate power tools in explosive atmospheres ,
such as in the presence of flammable liquids, gases
or dust. Power tools create sparks which may ignite the
dust or fumes .
c) Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose control .
2) Electrical safety
a) Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if
your body is earthed or grounded .
b) Do not expose power tools to rain or wet
conditions. Water entering a power tool will increase
the risk of electric shock .
3) Personal safety
a) Stay alert, watch what you are doing and use
common sense when operating a power tool. Do not
use a power tool while you are tired or under the
influence of drugs, alcohol or medication. A
moment of inattention while operating power tools may
result in serious personal injury .
b) Use safety equipment. Always wear eye protection.
Safety equipment such as dust mask, non-skid safety
shoes, hard hat, or hearing protection used for appropriate
conditions will reduce personal injuries .
c) Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to a
rotating part of the power tool may result in personal injury .
d) Do not overreach. Keep proper footing and balance
at all times. This enables better control of the power tool in
unexpected situations .
e) Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewellery or long hair
can be caught in moving parts .
f) If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used.
reduce dust- related hazards .
4) Power tool use and care
a) Do not force the power tool. Use the correct power tool
for your application. The correct power tool will do the job
better and safer at the rate for which it was designed .
Tel. +49 (0) 2191 / 46438-0
Tel. +49 (0) 2191 / 46438-0
Fax +49 (0) 2191 / 46438-40
Fax +49 (0) 2191 / 46438-40
E-Mail: info@swstahl.de
E-Mail: info@swstahl.de
S3300
S3300
Use of these devices can