Werbung
Verfügbare Sprachen
Verfügbare Sprachen
18
60
Chronograph: Accumulated timing
Example:
Start: (Start timing)
1
Stopp: (e.g. 15 min. 5 sec. after start 1)
2
Restart: (Resume timing)
3
4* Stopp: (e.g. 13 min. 5 sec. after restart 3) = 28 min. 10 sec.
(accumulated time is displayed)
Zero position: The 3 chronograph hands are returned
5
to their zero positions.
* Following 4 the accumulation of the
timing can be continued by pressing Button A
(Restart / Stop, Restart / Stop, ...).
Chronograph: Intermediate timing
Example:
Start: (Start timing)
1
Display interval: E.g. 10 min. 10 sec.
2
(timing continues in the background)
3* Making up the measured time: (The 3 chronograph hands
are quickly advanced to the ongoing measured time.)
Stopp: (Final time is displayed)
4
5 Zero position: The 3 three chronograph hands are
returned to their zero position.
*Following 3 further intervals or intermediates can be
displayed by pressing Button B (display interval / make up
measured time, ...).
Adjusting the chronograph hands to zero position
Example:
One or several chronograph hands are not in their correct
zero positions and have to be adjusted
(e.g. after battery change).
1 Pull out the crown to position III (all
chronograph hands are in their correct or
incorrect zero position).)
2 Keep push-buttons A and B depressed simultaneously
for at least 2 seconds (the second counter hand 360°
➠ corrective mode is activated)
Adjusting the second counter hand
Single step: Press l
briefly once
A
Continuous: Long press l
A
Adjusting the next hand: Press B
Adjusting the 1/10 second counter hand (No. 6 h)
Single step: Press l
briefly once
A
Continuous: Long press l
A
Adjusting the next hand: Press B
Adjustingthe minute counter hand (No. 9 h)
Single step: Press l
briefly once
A
Continuous: Long press l
A
Adjusting the next hand: Press B
3 Press crown back into Position I:
Conclusion of the resetting of the chronograph hands
(May be done at any time.)
GB
61
Werbung
