Packaging Contents - Yealink CP960 Schnellstartanleitung

Packaging Contents

IP Phone
Note: The CPW90 helps you to expand the audio range of the IP phone. For more information, refer to Yealink CPW90 Quick Start Guide.
We recommend that you use the accessories provided or approved by Yealink. The use of unapproved third-party accessories may
result in reduced performance.
Assembling the Phone
1a. Connect the power and wired network.
7.5m
2m
Note: The IP phone should be used with Yealink original PoE adapter (54V/0.56A) only. The use of the third-party PoE adapter may cause the
damage to the phone.
The cable should be replaced at once if its skin is broken.
Ethernet Cable (7.5m
CAT5E UTP cable)
X 2
Wireless Expansion Mic Charging Cradle
CP Wireless Expansion Mic CPW90
(Optional)
Quick Start Guide
0.3m
Quick Start Guide
Micro USB Cable
1b. Connect the power and wireless network.
7.5m
Wi-Fi
Refer to Wireless Network Connection mentioned
below in Configuring Your Phone for more information.
Ethernet Cable (2m
PSE
Power Cord
CAT5E FTP cable)
PoE Adapter
(Optional)
E
N
G
L
I
S
H
1