Specifications - Maktec MT060 Betriebsanleitung

ENGLISH
(Original instructions)
1 Button
2 Battery cartridge
3 Switch trigger
4 Reversing switch lever

SPECIFICATIONS

Model
Capacities
Machine screw
No load speed (min
Overall length
Net weight
Rated voltage
• Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
• Specifications and battery cartridge may differ from
country to country.
• Weight, with battery cartridge, according to EPTA-Pro-
cedure 01/2003
Intended use
The tool is intended for drilling and screw driving in wood,
metal and plastic.
General Power Tool Safety Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future
reference.
CORDLESS DRILL SAFETY WARNINGS
1. Use auxiliary handle(s), if supplied with the tool.
Loss of control can cause personal injury.
2. Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring. Cutting
accessory contacting a "live" wire may make
exposed metal parts of the power tool "live" and
could give the operator an electric shock.
3. Hold power tool by insulated gripping surfaces,
when performing an operation where the fas-
tener may contact hidden wiring. Fasteners con-
tacting a "live" wire may make exposed metal parts
of the power tool "live" and could give the operator
an electric shock.
Explanation of general view
5 Speed change lever
6 Graduations
7 Drill marking
8 Adjusting ring
MT060
Steel 10 mm
Wood 15 mm
Wood screw 5.1 x 35 mm
6 mm
–1
) 0 – 700
190 mm
1.3 kg
D.C. 9.6 V
MT061
10 mm
15 mm
5.1 x 35 mm
6 mm
0 – 700
190 mm
1.4 kg
D.C. 12 V
4. Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
5. Hold the tool firmly.
6. Keep hands away from rotating parts.
7. Do not leave the tool running. Operate the tool
only when hand-held.
8. Do not touch the drill bit or the workpiece imme-
ENE034-1
diately after operation; they may be extremely
hot and could burn your skin.
9. Some material contains chemicals which may be
toxic. Take caution to prevent dust inhalation
and skin contact. Follow material supplier safety
GEA010-1
data.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to safety rules for the subject product. MISUSE or
failure to follow the safety rules stated in this instruc-
tion manual may cause serious personal injury.
GEB051-3
IMPORTANT SAFETY INSTRUCTIONS
FOR BATTERY CARTRIDGE
1. Before using battery cartridge, read all instruc-
tions and cautionary markings on (1) battery
charger, (2) battery, and (3) product using bat-
tery.
2. Do not disassemble battery cartridge.
3. If operating time has become excessively
shorter, stop operating immediately. It may
result in a risk of overheating, possible burns
and even an explosion.
4. If electrolyte gets into your eyes, rinse them out
with clear water and seek medical attention right
away. It may result in loss of your eyesight.
9 Pointer
10 Sleeve
11 Ring
MT062 MT063
10 mm 10 mm
21 mm 24 mm
5.1 x 38 mm 5.1 x 63 mm
6 mm
High: 0 – 1,000 High: 0 – 1,000
Low: 0 – 350 Low: 0 – 350
203 mm 203 mm
1.3 kg
D.C. 9.6 V D.C. 12 V
6 mm
1.5 kg
ENC004-2
3